Bipel

rss

Category: Lathes - capstan and turret

Hydraulic Copying Device for Lathe ERNAULT CHOLET Hydraulic Copying Device for Lathe ERNAULT CHOLET
Pour Cholet 660
Lathes - capstan and turret
Ward 3DS Capstan Lathe Ward 3DS Capstan Lathe
Ward 3DS Capstan Lathe Spindle Bore 2.125” Spindle Speeds 55-1650 rpm Pneumatic Collet Chuck 2” Capacity Bar Feed Range of Collets 4 Way Indexing Tool Post Rear Tool Post Turret Tooling #B1964 Price £2,950 + VAT Ex-Works
Lathes - capstan and turret
Herbert No 4 Preoptive Monoslide Turret Lathe Herbert No 4 Preoptive Monoslide Turret Lathe
Herbert No 4 Preoptive Monoslide Turret Lathe S/N 67-11549-S Spindle Bore 2.125” Spindle Speeds 32-1500 rpm 3 Jaw Chuck 12” Dia 4 Way Indexing Tool Post Rear Tool Post Turret Tooling Front Sliding Guard #B9166 Price £2,950 + VAT Ex-Works
Lathes - capstan and turret
Herbert No 2D Capstan Lathe Herbert No 2D Capstan Lathe
Herbert No 2D Capstan Lathe S/N 46-13085-Z Spindle Bore 1.625” Dia Spindle Speeds 50-2550 rpm Collet Chuck Range Of Collets 4 Way Indexing Tool Post Rear Tool Post Turret Tooling #B9132 Price £2,950 + VAT Ex-Works
Lathes - capstan and turret
ERNAULT Cholet 435/550/660 Steady & follow rest ERNAULT Cholet 435/550/660 Steady & follow rest

Lathes - capstan and turret
CAZENEUVE Follow and Steady Rests CAZENEUVE Follow and Steady Rests

Lathes - capstan and turret
Ward 2DS Capstan Ward 2DS Capstan
Ward 2DS Capstan Lathe Spindle Bore 1.5/8” Dia Spindle Speeds 95-2040 rpm Collet Chuck Front 4 Way & Rear Tool Post Power Feed To Saddle Power Feed To Turret Range Of Collets Turret Tooling #78105 Price £1,750 ex works + vat
Lathes - capstan and turret
Ward 2DS Capstan Lathe Ward 2DS Capstan Lathe
Ward 2DS Capstan Lathe Spindle Bore 1.5/8” Dia Spindle Speeds 95-2040 rpm Collet Chuck Front 4 Way & Rear Tool Post Power Feed To Saddle Power Feed To Turret Range Of Collets Turret Tooling #78106 Price £1,750 ex works + vat
Lathes - capstan and turret
SCHIESS KE 160 Vertical Turret Lathe - Single Column SCHIESS KE 160 Vertical Turret Lathe - Single Column
ca. 1968, Control type conventional
Lathes - capstan and turret
Herbert 1436 Long Bed Turret Lathe Herbert 1436 Long Bed Turret Lathe
Herbert 1436 Long Bed Turret Lathe Swing over bed 36". Swing over cross slide 25.5". Spindle bore 8.5". Max distance chuck face to turret face 122". Spindle speeds: (Low range) 4-160 rpm. (High range) 12-480 rpm. Motor 12.5/50 HP....
Lathes - capstan and turret
Ward 7D Prelector Turret Lathe Ward 7D Prelector Turret Lathe
Ward 7D Prelector Turret Lathe Collet Chuck and Collets 25 – 1,000rpm 4 way tool post and turret tooling
Lathes - capstan and turret
Herbert Model 14/45 Combination Turret Lathe Herbert Model 14/45 Combination Turret Lathe
Herbert Model 14/45 Combination Turret Lathe Swing over bed 1230mm (48.5") Swing over cross slide 815mm (32") Maximum distance between chuck and turret face2300mm (90.5") Spindle speeds 3 -360rpm Spindle bore 210mm (8.25") 4 jaw chuck 1065mm...
Lathes - capstan and turret
WARD 10 Turret Lathe (Stock 28023) WARD 10 Turret Lathe (Stock 28023)
Swing over bed 31?. Spindle speeds 16-436 rpm. Spindle bore 5.3/8?. Max distance chuck face to turret face 61?. 4 way toolpost. Fitted with 20? dia. 4 jaw chuck.
Lathes - capstan and turret
WARD 7DS Capstan Lathe (Stock 28133) WARD 7DS Capstan Lathe (Stock 28133)
Fitted with 250mm dia 3 jaw chuck. Spindle speeds 50-1000 rpm. Spindle bore 2.3/4?. Coolant Pump. Newall Sapphire DRO.
Lathes - capstan and turret
Herbert 12B Combination Turret Lathe Herbert 12B Combination Turret Lathe
Herbert 12B Combination Turret Lathe 800mm diameter 4 jaw chuck Spindle speeds 5 to 640 RPM Swing over bed approx. 830mm Max. distance chuck to turret face 3090mm Spindle bore approx. 150mm S/No 8-11207 Full length hydraulic copying...
Lathes - capstan and turret
HERBERT 14/45 Combination Turret Lathe HERBERT 14/45 Combination Turret Lathe
Herbert 14/45 Combination Turret Lathe Swing over Bed: 1230mm (48 ½”) Swing over Cross Saddle: 815mm (32”) Distance Between Chuck & Turret Face: 2300mm (90 ½”) Spindle Speeds: 3 – 360 RPM Spindle Bore:210mm (8 ¼”) Machine with: ...
Lathes - capstan and turret
HERBERT 9C-30 Combination Long Bed Turret Lathe HERBERT 9C-30 Combination Long Bed Turret Lathe
HERBERT 9C-30 Combination Long Bed Turret Lathe Swing over bed 30"in (762mm) Swing over cross slide 21in (533mm) Spindle bore 4¼in (108mm) Spindle speeds 22-600rpm Max. distance spindle flange to turret face 100in (2,540mm) 4 way...
Lathes - capstan and turret
GISHOLT 5L Turret Lathe GISHOLT 5L Turret Lathe
. Swing over bed 391/2in. Swing cross slide 391/2in. Maximum distance between centres 160in. Spindle drive 50.4kW. Spindle speeds 6-340rpm (inf. var). Spindle bore 121/2in. 36in 4-jaw chuck. 24in 4-jaw chuck (turret). 2x steadies 14in - 291/2in...
Lathes - capstan and turret



Copyright MM Media Ltd registered in England No. 7838458 - Email us