Steven Mooney Machinery

rss

Category: Agencies

LNS Hydrobar Mini Sprint 4000mm Bar Feed LNS Hydrobar Mini Sprint 4000mm Bar Feed
LNS Hydrobar Mini Sprint 4000mm Bar Feed
Agencies
COLCHESTER Triumph 2000 x 50? Gap Bed Centre Lathe with DRO COLCHESTER Triumph 2000 x 50? Gap Bed Centre Lathe with DRO
COLCHESTER Triumph 2000 x 50? Gap Bed Centre Lathe with DRO Spindle speeds 25-2000 rpm. 50? between centres. 4 way toolpost. Acurite 2 axis DRO. 3&4 chuck. 14? dia. Faceplate
Agencies
KEARNS RICHARDS SE125 Table Type Horizontal Borer with SONY Digital Readout KEARNS RICHARDS SE125 Table Type Horizontal Borer with SONY Digital Readout
KEARNS RICHARDS SE125 Table Type Horizontal Borer with SONY Digital Readout Spindle dia. 125mm. Spindle taper 50 ISO. Spindle traverse 750mm. Milling quill 60 ISO. Milling Quill dia 220mm. Vertical travel of spindle 1800mm. Cross traverse 2400mm....
Agencies
BRIDGEPORT Interact 1 Mark 2 CNC Milling Machine with Heidenhain TNC2500 Control. Year 1994 BRIDGEPORT Interact 1 Mark 2 CNC Milling Machine with Heidenhain TNC2500 Control. Year 1994
BRIDGEPORT Interact 1 Mark 2 CNC Milling Machine with Heidenhain TNC2500 Control. Year 1994 Table Size 915mm x 320mm. Spindle Taper 30 Int (Manual Quick Change). Programmable Spindle Speeds 50 – 3750 rpm. X/Y/Z Travels 457mm X 305mm X 365mm....
Agencies
L&L Model LD48 Oil Country Lathe with Twin Chucks.Spindle Bore 153mm.Fanuc 0i-TD Control. Year 2012 L&L Model LD48 Oil Country Lathe with Twin Chucks.Spindle Bore 153mm.Fanuc 0i-TD Control. Year 2012
L&L Model LD48 Oil Country Lathe with Twin Chucks.Spindle Bore 153mm.Fanuc 0i-TD Control. Year 2012 Swing over bed 1220 mm. Swing over cross slide 850 mm. Distance between centres: 3000 mm. Spindle Bore 153mm. Width of bed: 610 mm. Tailstock...
Agencies
GIDDINGS & LEWIS RT1250 CNC Table Type Horizontal Borer with Siemens 840D Control. Year 2005 (Installed 2006) GIDDINGS & LEWIS RT1250 CNC Table Type Horizontal Borer with Siemens 840D Control. Year 2005 (Installed 2006)
GIDDINGS & LEWIS RT1250 CNC Table Type Horizontal Borer with Siemens 840D Control. Year 2005 (Installed 2006) Spindle dia. 155mm. Spindle Speeds 10-3500 rpm.Table size 1250mm x 1600mm. W travel 2500mm. X travel 2500mm. Y travel 2000mm. Z travel...
Agencies
Bulldog By Boxer 7 station Lock Former Bulldog By Boxer 7 station Lock Former
Bulldog By Boxer 7 station Lock Former 1891,08.04, 7 STN-E-F, 3 phase, mobile.
Agencies
DCE TORIT C24 -2G8 Dust Extraction Unit DCE TORIT C24 -2G8 Dust Extraction Unit
DCE Torit C 24 - 2G8 Dust Extraction Unit 5.5 KW, year 2001. 400 volts, 3 phase.
Agencies
Swager Powered with Rolls and Foot pedal, Turkish Swager Powered with Rolls and Foot pedal, Turkish
Swager Powered with Rolls and Foot pedal, Turkish, 3 phase, E stop, Foot pedal and rolls. Serial Number plate for motor, states Turkish, so assume machine is. Appears same size as CMZ 7.
Agencies
Wellform 216 Lock Former  Wellform 216 Lock Former
Wellform 216 Lock Former Capacity 4S 16 serial number 583, mobile.
Agencies
Webster Bennett Cast Iron Surface Table 72 x 36 x 31 high. Webster Bennett Cast Iron Surface Table 72 x 36 x 31" high.
Webster Bennett Cast Iron Surface Table 72 x 36 x 31" high.
Agencies
Colchester Mascot 1600 x 100 Colchester Mascot 1600 x 100"
Excellent Mascot 1600 x 100".Gap imp, C/w 3 & 4 jaw chucks, Q'change toolpost & holders, Heavy duty steady, lo-vo-lite, Excellent slides & headstock. . Original paint from new. Serial# 7/0215/12941
Agencies
Pearson Pressbrake 157 tons 3124mm, light guards Pearson Pressbrake 157 tons 3124mm, light guards
Pearson Pressbrake 157 tons 3124mm, SICK light guards., Pratt MPS 8511 control, manual back gauges not fitted. full length multi vee bottom, and full length top tool. under power on site.
Agencies
Pearson 10mm x 3m guillotine with front op power back gauge. Pearson 10mm x 3m guillotine with front op power back gauge.
Pearson 10mm x 3m guillotine with front op power back gauge., 3 supports and 1 sq arm. on site under power.
Agencies
CM 370 Horizontal Band Saw swivelling base CM 370 Horizontal Band Saw swivelling base
CM 370 Horizontal Band Saw swivelling base, Model 370S, serial number 243, Year 2007, and (2) conveyor approx. 5m Loaded from site in Liverpool.
Agencies
Karcher Professional HDS 6/10-4C pressure wash Karcher Professional HDS 6/10-4C pressure wash
Karcher Professional HDS 6/10-4C pressure wash, 230/240 volts, single phase, 3.0 kw, year 2014. serial number 010723
Agencies
MPE 950mm dia, 500 kgs, variable speed, manual tilt. MPE 950mm dia, 500 kgs, variable speed, manual tilt.
MPE 950mm dia, 500 kgs, variable speed, manual tilt. single phase, 400 AMP. 77/10 serial number 78087
Agencies
Hydrovane HV04 Vane Type Compressor Hydrovane HV04 Vane Type Compressor
Hydrovane HV04 Vane Type Compressor Loaded from site in Liverpool.
Agencies
Kemppi Master TIG AC DC 2500 Kemppi Master TIG AC DC 2500
Kemppi Master TIG AC DC 2500 , on trolley, earth clamp, torch, regulator. GAS NOT INCLUDED loaded from site Liverpool.
Agencies
Overhead travelling gantry crane and hoist 1600 kgs capacity Overhead travelling gantry crane and hoist 1600 kgs capacity
Overhead travelling gantry crane and hoist 1600 kgs capacity (10) stanchions Rossendale Crane Group 1600 electric DEMAg Electric Hoist, serial number AA83MM355. 9.5 M Span, 3.3m under hook. buyer loads from site, Liverpool.
Agencies
Avery Dynamic Blancing Machine Model 7210 Avery Dynamic Blancing Machine Model 7210
Avery Dynamic Blancing Machine Model 7210, serial number E61223, with (2) Steadies, capacity 12 - 1000 lb, working bed length 2500mm.
Agencies
XYZ Proturn 420 CNC Gap Bed Centre Lathe with Proto Trak LX3 Control XYZ Proturn 420 CNC Gap Bed Centre Lathe with Proto Trak LX3 Control
XYZ Proturn 420 CNC Gap Bed Centre Lathe with Proto Trak LX3 Control, 500mm Swing Over Bed, 260mm Swing Over Saddle, Approx 48" Between Centres, Spindle Speeds Low 15-300, Medium 50-850, High 140-2500RPM. Fitted With 310mm 3 Jaw Chuck, 3 Point Quick... With video
Agencies
LEADWELL LTC -20 AP CNC Turning Centre Fanuc OT-F - LEADWELL LTC -20 AP CNC Turning Centre Fanuc OT-F -
LEADWELL LTC -20 AP CNC Turning Centre Fanuc OT-F , Year 1992, Serial Number L29207024, with Hydrafeed Hydraulic Bar Feed, swarf conveyor. Machine, Electrical and Fanuc Control manuals. With video
Agencies
EMAG VL3, year 2000, Fanuc 21 I T control. EMAG VL3, year 2000, Fanuc 21 I T control.
EMAG VL3, year 2000, Fanuc 21 I T control.
Agencies
Excellent Bridgeport vari-speed with Crome Slides Excellent Bridgeport vari-speed with Crome Slides
Ex- Aerospace Co Excellent Bridgeport vari-speed with Crome Slides, excellent head & very little wear on slides. C/w Two axis Newall DRO.Align Power feed motor to X axis.With Vice , clamping set and tooling. Main Table 1220mm x 230mm. Traverses: X...
Agencies
Taylor Hobson Type D Engraver Taylor Hobson Type D Engraver
Taylor Hobson Type D Engraver. Complete with 2 off Etching transformers, Sets of engraving Letters & plates, spare belts. 3 phase / 440 volts Serial# 1663 Rpm 2730-18000. In good working order.
Agencies
Colchester Master 2500 x 40 imp gap bed lathe,. Ex-British Airways Colchester Master 2500 x 40" imp gap bed lathe,. Ex-British Airways
Colchester Master 2500 x 40" imp gap bed lathe,. Ex-British Airways, C/w 3 & 4 jaw chucks,Anilam Wizard 211 DRO, fixed & travelling steadies, Burned multi-size1 collect holder & collets, faceplate, bedstop, coolant. s/n #5/0004/06797
Agencies
Correa A 25/30 Bed Type Milling Machine Correa A 25/30 Bed Type Milling Machine
Table Surface 3.500 X 1.000 mm. Longitudinal Traverse (X Axis) 3.000 mm. Cross Traverse (Y Axis) 1.200 mm. Vertical Traverse (Z Axis) 1.500 mm. Rapid Traverse Feed 12.000 mm/min Taper ISO 50 Turning Speeds 20 – 2500 rpm Head Power 22...
Agencies
DMG DMU 80T 5-axis simultaneous machining center DMG DMU 80T 5-axis simultaneous machining center
OM 2003 CNC Heidenhain TNC 530 Table Dimension 1.250 x 700 mm. Travels (X/Y/Z) 880/630/630 mm. C Axis in Table CONTINUOUS B Axis Turning Head -91º / +12º CONTINUOUS Rapid Traverse 30.000 mm/min Max. Working Feed 30.000 mm/min. Taper SK-40...
Agencies
Bridgeport vari-Speed turret Mill Bridgeport vari-Speed turret Mill
Ex- Aerospace Co Bridgeport vari-speed with Crome Slides & Two axis Newall DRO.Align Power feed motor to X axis.With Vice , clamping set and tooling. Main Table 1220mm x 230mm. Traverses: X = 914mm. Y = 305mm. Z = 406mm. R8 Spindle. RPM 60 - 4200....
Agencies



Copyright MM Media Ltd registered in England No. 7838458 - Email us